technical data
| housing dimensions | 400 x 250 x 160 mm (W x H x D) |
| power supply | 100 ... 240 Volt / 50 ... 60 Hz |
| operating voltage | 15 V DC, about 20 watts |
| water hardness range raw water | 0.2 mmol/l to 8.9 mmol/l |
| measuring range carbonate hardness | 0.0018 mmol/l to 1.8 mmol/l |
| threshold value range soft water | 0.1 mmol/l to 0.9 mmol/l |
Check carbonate easily and quickly
Softcontrol Carbonate
A particular form of water softening is decarbonization, also known as partial softening. Accordingly to the complete water softening, Softcontrol Carbonate monitors the decarbonated water after a decarbonization unit. With exceeding of a given carbonate threshold alarm is triggered.
At a glance
- monitoring of decarbonated water after a decarbonization plant
- alarm limits from 0,1 mmol/l to 0,9 mmol/l
- no use of indicators
- self-monitoring of the device system
- separate alarm for carbonate hardness and service
- parameterizable current loop 4 to 20 mA
- measuring value output via display
- easy installation and parameterization
- ecological operation because there is no addition of indicators
Ideal solution for
- pharmaceutical industry
- electrical engineering
- medical technology
Prevents
- subsequent damages caused by hard water intrusions
- lamination
- defects
Advantages
- high process reliability
- high efficiency for regeneration
- continuous measurement of carbonate as long as water flows
- automatic data storage and data output via current loop
Further products
OFS GmbH
Softcontrol Smart
The simplest residual hardness monitoring based on 10 % of the raw water hardness
Small, compact and very uncomplicated
Softcontrol Data
Visualized residual hardness control by display
Individually and clearly arranged
Softcontrol Carbonat
Monitoring of decarbonization processes
Soft water threshold values from 0,1 mmol/l to 0,9 mmol/l
Softcontrol V-UE
Monitoring of blended water systems
For variable water hardness threshold values from 0.2 mmol/l to 10.8 mmol/l