x

society for analytical and metrological systems

Search

lang-en
  • lang-de
  • lang-en
  • lang-es
  • lang-ru
  • lang-cn

technical data

housing dimensions

400 x 250 x 160 mm

(W x H x D)

power supply

100 ... 240 Volt /

50 ... 60 Hz

operating voltage

about 20 Volt

conductivity

measuring range

0.05 ... 1 mS / cm,

range restriction according to the selection of the cell constant of the conductivity sensor

conductivity

threshold value

parameterizable

within the measuring range

discharge valve

control

potential-free contact,

optional relay for switching the supply voltage for the discharge valve

condensate monitoring from the steam boiler

Conductivity-Control

In steam boiler systems, it is important that sufficient amount of condensate is present with good quality. With the help of Conductivity-Control, continuous conductivity monitoring and targeted discharge control of contaminated condensates are carried out. Its constant control increases the process reliability and energy efficiency of the steam boiler system.

at a glance

  • range control of conductivity and temperature of the condensate
  • triggering of alarm and possibly control of the discharge valve
  • data storage in the electronic operating diary or USB stick
  • no use of indicators
  • continuous measurement

ideal solution for

  • food industry
  • big laundries
  • beverage industry

prevents

  • defects
  • consequential damages by corrosion
  • deposits

advantages

  • continuous monitoring of condensate flow
  • if the threshold value is exceeded, the alarm and control of the discharge valve occur
  • in case of the undercut of the threshold value, a service alarm occurs
  • visualization of measured values and manual control via display
  • optionally, networking with higher-level control centers and remote maintenance is possible

further products

OFS GmbH