Softcontrol Data - videos on assembly, measurement and sensor replacement

With "Softcontrol Data" you can comprehensively monitor the soft water for increased hardness concentrations. It offers individual setting options and a clear presentation of the information on the display. For increased operational and process reliability with the best user friendliness.

What does the "Softcontrol Data" hardness measuring device actually look like?
In the video you can see that the ion-selective sensor and the electronic components are housed inside the device.

The measurement of soft water is shown in the display as follows. The hardness is always displayed in relation to the set limit value. That means, is the measured hardness above or below the parameterized limit value.

How is a sensor replaced on the Softcontrol Data hardness measuring device?
In the video you can see how easy it is to change the sensor, which should usually take place every 6 to 9 months. This is indicated on the device. The measurements, which take place twice per minute, are independent of the operating time of the sensor.